CAN16-PMC

Can the CAN – CAN 2.0B compliant PMC module with up to 16 CAN interfaces
Use Case
  • For all test system applications where high channel counts are required
  • CAN-bus participant simulation or monitoring modus
  • Gateway applications
Benefits
  • High resolution timestamping (1 μs) for all received messages
  • »Listen-only Mode« available
  • Also available with 8 channels
Key Features
  • Compliance with CAN (ISO-11898) – specification 2.0B
  • Intelligent plug-in board with up to 16 CAN interfaces
  • Optimized for performance: DMA block transfers support
  • On-board FIFO data buffering both transmit and receive
  • Extended Remote Transmit Request capability
  • Applicable on PCI, cPCI, PCIe, PXI, and VME hardware platforms
  • Driver and API support for Windows® and Linux

Technical Data

General
  • Applicable on PCI, cPCI, PXI, PCIe, and VME platforms
  • Compliance with CAN specification 2.0 B
  • Up to 16 CAN interfaces
  • FPGA based CAN controllers
  • Additional 32-bit microcontroller inside FPGA (application support processor)
  • Driver supports DMA transfer
  • On-board FIFO data buffering
  • Extended remote transmit request capability
  • IRIG-B time code synchronization
  • Supports standard CAN bus speeds
  • In-system upgrade supported
  • On-board line termination enabled by SW
  • On-board temperature sensor
Transmission and Reception
  • High resolution (1 μs) timestamping for all received messages with optional IRIG-B time code synchronization
  • Raw CAN bit stream recorded for every received message
  • Transmit and receive statistics
Error Detection
  • Listen-only mode
  • Error detection: CRC, Acknowledge, Form, Bit, Stuff
Host Interface
  • PCI 2.2 standard, 33/66 MHz, 32-bit interface
  • Compatible with 3.3 V and 5 V PCI VI0
Software
  • SDK with C API and driver available for the following platforms:
    • Windows® 7 32 bit/64 bit
    • CentOS 5 (with RT patch) 32 bit/64 bit
    • CentOS 6 32 bit/64 bit
  • Drivers for other platforms on request
Physical Dimensions
  • Single-size PMC: 74 mm x 149 mm
Operating Environment
  • Operating temperature: 0 °C to 55 °C
  • Storage temperature: –40 °C to 70 °C
  • Humidity: 5 % to 90 % non-condensing
Power Consumption
  • max. 7.5 W
Part Number
  • 702177-02